Spare Parts

TUNGSTEN CARBIDE BLAST NOZZLES

3/4" NPSM STRAIGHT BORE SHORT NOZZLES

Suitable for use in small pressurer blast machines, blast cabinets and internal pipe blasting equipment.

Part No Size Prat No Size
0052-002 Ø 3.2 x 45mm 0052-005 Ø 8.0 x 45mm
0052-003 Ø 4.8 x 45mm 0052-006 Ø 9.5 x 45mm
0052-004 Ø 6.3 x 45mm 0052-008 Ø 13.0 x 45mm

1-1/4" NPSM ANGLE NOZZLES

Ideal for cleaning "hard to reach" areas and are available with one, two or three outlets.

Part No No of outlets Bore Diameter Length
       
0052-022 3 3.2mm 80mm
0052-023 3 4.8mm 80mm
0052-024 3 6.0mm 80mm
0052-025 3 8.0mm 80mm
0052-026 3 9.0mm 80mm
0052-025/1 1 9.0mm 80mm

LONG VENTURI NOZZLES

Now accepted as the industry standord, these are widely used for high production blasting as they provide excellent durability and wear restance. Thses are available in aluminium jackets.

1-1/4" NPSM 50mm Length Orifice Size
Fine Thread Wide Thread    
0052-134 0052-124 135mm 6.3mm (1.4")
0052-135 0052-125 145mm 8.0mm (5/16")
0052-136 0052-126 170mm 9.5mm (3/8")
0052-137 0052-127 200mm 11.0mm (7/16")
0052-138 0052-128 230mm 13.0mm(1/2")

 

 

SEMPERIT BLAST HOSES  
   
Identification  
Printed layline "SEMPERIT STANDARD"  
Abrasion rating meet DIN 53516 appr. 80 cu. Mm  
Exceeds requirement of BS 5121  
   
Country of origin : Austria  
   
Construction Technical Data
Tube: Working pressure
NR / SBR / BR, black, 12 bar (175 psi)
smooth, anti-static,  
abrasion resistant  
   
Reinforcement: Temperature range:
Textile, wrapped 35˚C to 80˚C
   
Cover: Safety factor:
SBR, black, smooth, 3.5 : 1
cloth impression, anti-static  

 

 

PART NO LENGTH RAET NO LENGTH INNER DIAMETER OUTER DIAMETER
0032-241 10m 0032-242 20m 1/2in (13mm) 27mm
0032-262 20m 0032-264 40m 1in (25mm) 39mm
0032-272 20m 0032-274 40m 1-1/4in (32mm) 48mm
0032-282 20m 0032-284 40m 1-1/2in (38mm) 56mm

 

SURFACE PREPATION & CLIMATIC

CONDITIONS TESTING INSTRUMENT

1. 0991-123 SURFACE PROFILE GAUGE Measures peak to valley heights on blast cleaned surfaces on a dial.

2. 0991-127 SURFACE PROFILE COMPARATOR Compact, extemely durable reference discs designed to visually determine the surface profile of blast cleaned surfaces. Blast cleaned suface is compared with the reference disc through the illuminated magnifier.

3. 0991-128 SWEDISH STANDARD ISO-8501-1 Photographic suface preparation colour print standards illustrating the degrees of hand, power tool and blast cleanliness over mill scale and various rust grades of new steel.

4. 0991-125 TESTEX THICKNESS SNAP GAUGE Measurement of the surface profile when taken with Testex Tape. Testex Tape can produce virtually exact replicas of the blasted. surface profile which can be measured using a Snap Gauge.

5. 0991-931 INSPECTION MIRROR(TELESCOPIC) DIA 2-1/2" X 10" LONG High qquality, rugged inspection mirror for examining corner, backs of angles and other "difficult access" areas. 6 0991-116 BACHARACH SLING PSYCHROMETER Pocket-sized, hand-held sling psychrometer has replaceable red spirit and mercury bulbs that range from 30˚ to110˚F and -5˚ to 45˚C. Built-in slide rule for relative humidity reading at a glance.

7. 0991-114 DEWPOINT & R.H. CALCULATOR Provides accurate values of Relative Humidity (RH) and Dewpoint from the wet and dry bulb temperatures of a Sling Psychrometer.

8. 0991-900 HYPODERMIC NEEDLE PRESSURE GAUGE 1/4" C/W NEEDLE Pocket sized pressure gauge adapted for use with hypodermic needle to determine blasting air-pressure at the nozzle. Instant readings from 0- 210 psi.

9. 0961-004 BRESLE KIT Assessment of soluble salts on surfaces.

Other measuring and testing instruments are also available.

 


Ready to get started

if you are looking for good products, good services or have any questions, do not worry! let us provide it for you, just click red bottom below or contact us immediately 02-1976700 - 4